Thermoregulator TH1
RS th1
Larger picture

The Ratek TH1 is designed as a general purpose regulator to provide temperature control of water within a tank or reservoir, and operate continuously for long periods of time. A clamp bracket will enable the regulator to be attached to a variety of tanks and containers.
Specifications    
Power requirements 240vac/1020 watts  
Control type Solid state proportional  
Control range Temperature range ambient + 5°C to 75°C, min 28°C  
Control stability ±0.2ºC  
Heat up time

30°C to 75ºC (stabilised) in 40 minutes (insulated tank with

8 litres of water at room temperature of 17°C)

  
Agitation Twin bladed paddle  
Safety features Low level cut out (thermal fuse)  
Minimum tank depth 180mm  
Overall dimensions H295 x D180 x W145  
Weight 3.4 kg

Thermoregulator TH3
Thermoreg dit
Larger picture

The Ratek TH3 is designed to provide accurate temperature control of water within a tank or reservoir, and operate continuously for long periods of time. A heavy duty clamp and pump shield enable a variety of tanks and containers to be used. This regulator is available with pump (TH3P) or circulating paddle (TH3C).

Specifications    
Power requirements 240vac/1020 watts  
Control type Solid state proportional  
Control range Ambient + 5°C to 100°C, min 28°C  
Control stability ±0.1ºC  
Heat up time 30°C to 100°C (stabilised) in 45 minutes (insulated tank with 8 litres of water at room temperature of 17°C)  
Pump capacity 10.5 litres/min. at zero head  
Safety features Low level cut out (thermal fuse)  
Minimum tank depth 180mm  
Overall dimensions H300 x D190 x W125  
Weight 3.4 kg

Thermoregulator TH5
Thermoreg dit
Larger picture

The TH5 Thermoregulator is designed to provide accurate temperature control of water within a tank or reservoir, and operate continuously for long periods of time. This regulator is fitted with a large capacity pump for efficient stirring within the waterbath, and can be used to pump externally. Safety features include a float switch that will remove heating if the water level falls too low, plus an over temperature alarm. The alarm will sound if the water temperature exceeds the set point and heating will stop.

Specifications    
Power requirements 240vac/1020 watts (optional 2020watts)  
Control type Custom digital microprocessor  
Control range 0°C to 99.9°C. (cooling required below ambient)  
Control stability ±0.05ºC  
Heat up time 20°C to 99.9°C (stabilised) in 45 minutes (insulated tank with 8 litres of water at room temperature of 17°C)  
Pump capacity 10.5 litres/min. at zero head  
Safety features Low level cut out, over temperature audible and visible alarm indication  
Minimum tank depth 180mm  
Overall dimensions H300 x D190 x W125  
Weight 3.4 kg


SF